![]() |
![]() ![]() |
![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
![]()
Weatherdek is a sheet vinyl membrane used to waterproof walkways,
landings, decks, stairways, roof decks, pool areas, entry ways, sauna and hot tub areas, patios, etc.
Weatherdek membranes are glued to a prepared surface and heat welded at the joints. Perimeters are fastened to ensure a long lasting finish. Weatherdek eliminates the need for repainting or restaining and removes such irritants as wood splinters, nailheads and unsightly cracks. The embossed texture provides a skid resistant surface for secure footing.
Ongoing quality control testing ensures Weatherdek meets strict standards for fire ratings, mildew inhibitors, ultra violet and heat stabilizers.
Weatherdek provides the comfort of knowing any surface that it is applied to will be waterproof, thus creating dry usable space underneath.
![]()
Weatherdek offers a full line of Waterproof Vinyl Deck membranes in a
variety of attractive colours, patterns, textures and thicknesses to provide
the best solution for your deck.
The anticipated life of a Weatherdek vinyl deck surface is anywhere from 12 to 20 years depending upon the application, exposure and care of deck.
Weatherdek membranes are a PVC sheet applied membrane, supplied in roll form and available in various thickness and widths. When installed the vinyl is laid out and fully adhered to most smooth substrates, all joints in the membrane are overlapped approximately 1" and heat welded, using a hot air welder, to form a fully waterproof seal. The vinyl is then mechanically fastened at the deck perimeters using a number of different details depending upon the specific application.
Deck Preparation
The perimeters of the deck surface may also require some preparation and depending upon the chosen finishing detail to be used, a flashing may be required at either the outside or the inside edges of the deck.
The deck construction to which your Weatherdek will be applied plays an important roll in how your
Weatherdek will look and perform throughout it's life span. The following are the manufacturers recommendations
for the best performance from your Weatherdek:
SURFACE PREPARATION DETAILS DIAGRAM CLICK HERE
Weatherdek is best cleaned using a mild soap and water solution (common dish soaps are fine), gently scrub the deck using soft bristled brush and then rinse the deck thoroughly with a hose to ensure you don't leave a soap film on the deck surface. For situations where a stronger cleaning solution is required, Spray cleaners like "Fantastic" or "409" can be used on tough stains or spills, however continued use of these products is not recommended.
Weatherdek Products | WeatherRail | Weatherdek/WeatherRail Gallery Weatherdek Inquiry | Weatherdek Announcements Weatherdek Privacy Policy
|
|||||||||||||||